Wire-Lists

Wire-Lists #60 – Omnidirectional Verses Directional Antennas

Do you know the difference between omnidirectional verses directional antennas and which you should be using for your...

Wire-Lists #59 – Deciphering Battery Life and Voltages

Occasionally, customers contact us because the battery reading on their  receiver (or transmitter) shows a lower voltage than...

Wire-Lists #58 – Differences in RF Scan Results

We often have customers ask about the scan differences between receivers. While we attempt to keep the performance...

Wire-Lists #57 – ALP690 Antennas with Digital Wireless

It’s no secret that today’s environment is RF-heavy. Between cell phone traffic and various signals from the surrounding...

Wire-Lists #56 – Connecting DSQD and M2T via Dante to an AES67 Device

All current Lectrosonics Dante-enabled devices have the capability to support AES67 so that you can receive audio streams...

Wire-Lists #55 – Creating, Updating and Sharing FlexLists with M2R, M2T and DCHT

If you need to monitor multiple different mixes on location or on a stage and are using an...

Wire-Lists #54 – Lectrosonics Wireless for Guitars & Basses

For decades now, Lectrosonics wireless systems have been used by some of the...

Wire-Lists #53 – 7 Steps to Setting Up Wireless Designer and Dante® Using a Network Switch and a DSQD

Back in Wire List #42,we discussed connecting to Wireless Designer over a network. Since then, we have received...

Wire-Lists #52 – Compensating for RF-Heavy Environments With Antenna Amplification

Our Repair department occasionally gets reports of performance issues with digital transmitters that are being used in an...

Wire-Lists #51 – Expanding Channel Capacity for Systems in Larger Facilities Using Zones in Wireless Designer

Wireless Designer’s new Zone feature (v2.0.30 for Windows and v2.0.25 for Mac and later versions) allows you to...