Wire-Lists

Omnidirectional vs. directional antennas: graphic comparing signal spread

Wire-Lists #60 – Omnidirectional Verses Directional Antennas

Do you know the difference between omnidirectional verses directional antennas and which you should be using for your situation? The...READ MORE

Battery icon with lightning bolt, representing battery life and voltages.

Wire-Lists #59 – Deciphering Battery Life and Voltages

Occasionally, customers contact us because the battery reading on their receiver (or transmitter) shows a lower voltage than when measured...READ MORE

RF scan results graph with digital display showing "05 1

Wire-Lists #58 – Differences in RF Scan Results

We often have customers ask about the scan differences between receivers. While we attempt to keep the performance equal, there...READ MORE

Wire-Lists #57 – ALP690 Antennas with Digital Wireless

It’s no secret that today’s environment is RF-heavy. Between cell phone traffic and various signals from the surrounding area, it’s...READ MORE

Wire-Lists #56: DSQD, M2T, Dante, AES67 connection icon

Wire-Lists #56 – Connecting DSQD and M2T via Dante to an AES67 Device

All current Lectrosonics Dante-enabled devices have the capability to support AES67 so that you can receive audio streams from non-Dante...READ MORE

The Wire-Lists #55 podcast cover: Creating, Updating, Sharing FlexLists with M2R, M2T, DCHT

Wire-Lists #55 – Creating, Updating and Sharing FlexLists with M2R, M2T and DCHT

If you need to monitor multiple different mixes on location or on a stage and are using an M2R with...READ MORE

Wire-Lists #54 – Lectrosonics Wireless for Guitars & Basses

For decades now, Lectrosonics wireless systems have been used by some of the top touring guitar and bass players. In...READ MORE

Wire-Lists 53: Setting up Wireless Designer and Dante with a network switch and DSQD.

Wire-Lists #53 – 7 Steps to Setting Up Wireless Designer and Dante® Using a Network Switch and a DSQD

Back in Wire List #42,we discussed connecting to Wireless Designer over a network. Since then, we have received several calls...READ MORE

Wire-Lists #52: Antenna amplification for RF-heavy environments

Wire-Lists #52 – Compensating for RF-Heavy Environments With Antenna Amplification

Our Repair department occasionally gets reports of performance issues with digital transmitters that are being used in an RF-heavy environment....READ MORE

Wire-Lists #51 – Expanding Channel Capacity for Systems in Larger Facilities Using Zones in Wireless Designer

Wireless Designer’s new Zone feature (v2.0.30 for Windows and v2.0.25 for Mac and later versions) allows you to coordinate multiple...READ MORE