MC100RCA

3.5mm mini TRS (stereo) plug to two RCA plugs; 15” long

MC100XLR

3.5mm mono plug to male XLR unbal; pin 2 (+) with pins 1 and 3 jumpered; 100 ohm attenuator; 15” long

MC100TRS

3.5mm TRS (stereo) straight plug to 3.5mm TRS (stereo) right angle plug: 15” long

MC16C

Male 1/4" mono plug to male 1/4" mono plug, 16' coiled cord.

MC35

Female XLR to female TA5F 5-pin; 37" long; wired for line level input to belt-pack transmitters

MC36

Right angle 3.5 mm mono mini plug to straight 3.5 mm mono mini plug; 37" long; general purpose patch cord

MC37

Male 3.5 mm mono mini plug to 3.5 mm mono mini jack; 37” long

MC38

Male 1/4" mono plug to mini (mono) plug; 37" long; general purpose patch cord

MC40

Female XLR to female TA5F 5-pin; 37" long; wired for dynamic mic input to transmitters.

MC41

Female XLR to female TA5F 5-pin; 37" long; wired for mic level input to transmitters. 3k resistor in audio line. Works with early 5-pin inputs and servo bias inputs.

MC44

Male 1/4" mono plug to male locking micro plug; 37" long.

MC46

Female 1/4” mono plug to TA5F 5-pin plug; wired for dynamic Lo-Z mics into belt-pack transmitters; 37” long

MC47

Male RCA plug to TA5F 5-pin; wired for line level input to belt-pack transmitters; 37” long

MC50

3.5 mm mini jack to male locking micro plug ; 37” long; for electret microphone with 3.5 mm plug to Lectrosonics transmitter with locking micro jack

MC55

3.5 mm mono mini plug to XLR male; 15” long; converts unbalanced line level to balanced mic level; 45 dB attenuator; built-in caps bypass phantom power

MC60

Female XLR plug to TA5F 5-pin; provides conventional phantom power to electret mics; 37” long

MC65

1/4” TRS (stereo) plug to 3.5mm TRS (stereo) plug; UDR receiver headphone outputs to computer audio card inputs; 10 ft. long

MCSRPT

Audio cable for SR Receiver.
TA3F plug to tinned tails; 15" long.

MCSRTRS

Audio cable for SR Receiver.
3.5mm TRS (stereo) plug to dual TA3F plugs; 12" long.

MCSRXLR

Audio cable for SR Receivers and D4 Receiver Output.
TA3F plug to XLRM; 12" long.

MCSRXLRF

Audio cable for SR Receivers and D4 Transmitter Input.
TA3F plug to XLRM; 12" long.

MCSR/5PXLR5P

Audio cable for SR Receiver.
Right angle TA5 on the receiver end and a 5-pin, full-size XLR male on the other end. Includes set screws and hex wrenches. 25" long.

MCSR/5PXLR1

Audio cable for SR Receiver.
Right angle TA5 on the receiver end and one full-size XLR 3-pin male connector. 20" long.

When used with the SR5P, this cable delivers the Channel 2 audio output on the balanced XLR. Channel 1 is delivered to the camera through the in-slot connection

MCSR/5PXLR2

Audio cable for SR Receiver.
Right angle TA5 on the receiver end and two full-size XLR 3-pin male connectors at the end of the Y. 20" long.

MCAXLRATTEN

Balanced XLR male to stripped and tinned leads. 20 dB attenuation as supplied. Solder bridge jumpers provided to select 30 dB or 40 dB attenuation. 6 ft. long. Commonly used with the Venue receiver to achieve a mic level output.

MI33ARA for use with transmitters with non-servo bias input ONLY
MI33PRA passive, for use with with high-output instrument pickups
MI39ARA for use with transmitters with servo bias input

1/4” mono right angle plug with locking 5-pin (Switchcraft TA5F) plug; built-in active preamp board for optimum interface with instrument pickups.

Download the Usage Guide to find out which cable is right for your transmitter/instrument combination.

(See also IS400 Instrument System)

MI33AST for use with transmitters with non-servo bias input ONLY
MI33PST passive, for use with with high-output instrument pickups
MI39AST for use with transmitters with servo bias input

1/4” mono straight plug with locking 5-pin (Switchcraft TA5F) plug; built-in active preamp board for optimum interface with instrument pickups.

Download the Usage Guide to find out which cable is right for your transmitter/instrument combination.

(See also IS400 Instrument System)

RATPAC

Right-angle plug kit
Accessory kit for building a single right angle 3-pin or 5-pin TA Series connector for transmitter inputs or SR receiver outputs. Kit includes large and small backshells, two different inserts and strain relief sleeves.

21357

Locking micro plug

21359

Female, 5 pin TA5F plug

26481

Stainless Steel Cover for MM400a waterproof connector

WPMC-3

Watertight Microphone Plug Kit. Waterproof connector kit containing all the necessary components for creating three watertight microphone plugs.

Download the Assembly Instructions in PDF format.

See also M150 Microphones.

WPMC-10

Watertight Microphone Plug Kit. Waterproof connector kit containing all the necessary components for creating 10 watertight microphone plugs.

Download the Assembly Instructions in PDF format.

See also M150 Microphones.